Download HUAWEI USB COM 1.0 Driver (Latest Official)

Download the official HUAWEI USB COM 1.0 driver. This special driver is essential for connecting Huawei & Honor devices in Test Point mode for flashing, FRP, and repair.

Are you trying to repair a bricked Huawei or Honor device? When you connect the phone using the “Test Point” method, your computer must recognize it as a special “HUAWEI USB COM 1.0” port. If your Device Manager shows “Unknown Device” or “USB-SER,” it means you are missing this critical driver.

This driver is specifically designed for HiSilicon (Kirin) chipsets and is essential for low-level flashing and FRP removal. Tools like the FRT Tool Pro cannot communicate with the device in this mode without this driver.

Download HUAWEI USB COM 1.0 Driver

This is the official driver package. It must be installed manually through the Device Manager. This package works for both 32-bit and 64-bit Windows.

What is the HUAWEI USB COM 1.0 Driver?

This is not a normal ADB or Fastboot driver. The HUAWEI USB COM 1.0 driver is an emergency, low-level driver used to communicate with Huawei and Honor devices (powered by Kirin CPUs) when they are in “Test Point Mode.”

This mode is similar to “EDL Mode” on Qualcomm devices. You need this driver to:

• Unbrick a hard-bricked (dead) Huawei phone.
• Bypass the FRP (Google Account) lock.
• Flash board firmware or repair software.
• Use repair tools that need a direct connection to the Kirin chipset.

How to Install HUAWEI USB COM 1.0 Driver (Manual)

This driver does not have an automatic installer (.exe). You must install it manually using Device Manager. Follow these steps exactly.

1. (Crucial Step) Disable Driver Signature: Before you begin, you must disable driver signature enforcement in Windows. This is the most common reason for installation failure.
2. Download & Extract: Download the HUAWEI_USB_COM_1.0_driver.zip file from the button above and extract it to a folder you can easily find (e.g., your Desktop).
3. Open Device Manager: Right-click the Start Menu and choose “Device Manager”.
4. Connect in Test Point Mode:
   • Turn off your Huawei phone completely.
   • Use tweezers to short the correct “Test Points” on the phone’s motherboard while plugging in the USB cable.
5. Find the Device: In Device Manager, you will see a new device appear, usually under “Other devices” with a yellow triangle, named “Unknown Device” or “USB-SER”.
6. Update Driver: Right-click on that “Unknown Device” and select “Update driver”.
7. Browse for Driver: Choose “Browse my computer for drivers”.
8. Select Folder: Click “Browse” and navigate to the folder where you extracted the driver files. Click “Next”.
9. Install: Windows will show a security warning. Choose “Install this driver software anyway”.

After a successful installation, the device will move to “Ports (COM & LPT)” and will be named “HUAWEI USB COM 1.0 (COMxx)“. Your FRT Tool Pro will now be able to detect and work with the device.